MOBILE BREATHALyzER INTERNAL LIGHTS
The lights inside your Mobile Breathalyzer signal certain activities
as follows:
• Back light on steady = Unit on, unpaired
• Back light and front light on steady = Unit on, paired with
mobile device
• Back light on, front light blinking = Unit ready to test
• Bottom light on = Transmitting data to mobile device via Bluetooth
• Back and front lights pulsing slowly = Battery charging
• Back and front lights on very dimly = Battery fully charged
PRECAUTIONS
1. Do not blow smoke, food, or liquids into your BACtrack
Mobile Breathalyzer. This will damage the sensor.
ENG-16.
2. Do not test in areas with strong winds, smoke.
3. Send your breathalyzer in for periodic calibration service as
required. (See Verification and Calibration.)
4. Your BACtrack Mobile Breathalyzer is designed to be used in
a temperature range of 32-104 °F (0-40 °C).
5. Avoid testing in the presence of any substances that contain
methyl alcohol, isopropyl alcohol or acetone. These substances
may interfere with the results of the test.
6. You cannot use the results of this product in court.
7. Do not use your BACtrack Mobile Breathalyzer as a tool to
determine whether you should operate a motor vehicle or
equipment, or perform any other dangerous act.
8. Do not drink and drive. Always have a designated driver
when alcohol is being consumed.
ENG-17.