Care And Handling; Troubleshooting - Wacker Neuson VAL 300 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
VAL 300
3.5

Care and Handling

The use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION
3.5.1
The laser is a precision instrument which must be handled with care.
Avoid shock and vibrations. Always store and transport the laser and
its accessories in the carrying case.
3.5.2
Although the laser is weather resistant, make sure to clean and dry it
with a soft cloth after each use. This will increase the battery life.
3.5.3
Do not store your laser at temperatures below -4°F (-20°C) or above
176°F (80°C) because some electronic components could be
damaged.
3.5.4
To avoid water condensation inside the instrument, do not store it
inside the case if the instrument or the case is wet.
3.5.5
To maintain the laser's precision, check and calibrate the beam
regularly.
3.5.6
Keep the aperture lens dry and clean. Use a soft cloth and glass
cleaner to clean it.
3.5.7
Charge the batteries regularly. However, charge them only when they
are nearly drained or completely out of power. Recharging batteries
that are still usable will shorten their capacity.
3.6

Troubleshooting

For laser repair, calibration, or warranty repair, please contact
EQUIPRO at 1-866-378-4776.
wc_tx000805gb.fm
EN-26
Maintenance

Publicité

Table des Matières
loading

Produits Connexes pour Wacker Neuson VAL 300

Table des Matières