Care & Maintenance - djive FLOWMATE Classic 120 Mode D'emploi

CARE & MAINTENANCE \\\
ATTENTION
Always switch off and unplug the fan before performing any cleaning.
Don't splash water on the fan. It may damage the fan. Please don't use
banana oil, gasoline, alcohol, bleach or metal object to clean the surface
of the fan. Otherwise it may discolor or deteriorate the surface of the fan.
Cleaning the appliance
1. Use a vacuum cleaner with a brush attachment to clean the grills.
2. Use a soft duster or a cloth rag to dust off all the surfaces.
3. To clean the blade, first remove the front grill and cover by unscrewing
the small screws around the edge of the rear grill.
4. Wipe all the parts with a soft damp (not wet) cloth dipped in mild soapy
water. ATTENTION: Ensure that water doesn't get into the motor unit.
5. Use a dry cloth to thoroughly dry the blades and the grills before
reassembling. Make sure that the fan is completely assembled before
switching on again.
15