2.2. Station Four-W
Station Four
ª
-W is a four button wall mount station that includes a hand-held (5-pin) microphone
with a push-to-talk switch. Each of the four zone presets are defined and programmed by the
PageMatrix software.
Front Panel
Zone Preset buttons w/LEDs(4):
Used to select any of the four zone presets. A green LED indicates the zone is available,
while a red LED indicates it is in use by another station. The LED will blink to confirm
the selection.
Five-pin Mic Input:
Used to connect the supplied 5-pin handheld microphone.
Mic Volume:
Recessed to the right of the microphone input, use a small screwdriver to adjust the mic
gain.
Rear Panel
3-Pin Connector:
This is the analog audio signal output to be connected to the PageMatrix controller.
See the wiring diagram, Appendix 5.3.
4-Pin Connector:
This connects the control data to and from the PageMatrix controller and also the power for
the station. See the wiring diagram, Appendix 5.3.
™
Wall-Mount Paging Station
8