Maintenance - Duux bora Smart Manuel D'utilisation

Locate the drain outlet on the back of the
1
device, unscrew the drain cover and pull out
the water plug.
1+2
Connect the drain tube to the drain outlet.
2
Place the other end of the drain tube in a sink
3
or container.
3.
10
Attention: the drain tube may not be extended
and must always be placed at least 10cm below the
water outlet to ensure water can flow through.
X

3. Maintenance

Important: Be sure to remove the power plug
from the outlet before carrying out maintenance.
Important: Do not soak or immerse the power
plug or the device in water.
Important: We recommend daily maintenance
to prevent the growth of bacteria and scale inside
the water tank.
Cleaning
• Please use a soft cloth to wipe the dust on the
body; If the surface is too dirty, it is recommended
to wipe it clean with a damped cloth mixed with
neutral detergent.
• Do not use chemical solvents, gasoline, polishing
powder, etc. to clean the surface of the device.
Do not place the device or any of its parts in the
dishwasher to clean. It is best to clean it with
clean water.
• If the regular cleaning can't remove the scale on
the inside of the water tank, mix some lemon
vinegar with lukewarm water (water and lemon
vinegar ratio 10ml:1g) Pour everything into a
large container and let it soak for 5 minutes. Then
gently scrub the scale surface with a soft brush
until the scale is removed.
Filter
Clean the filter and the frame at least once per two
weeks simply by simply rinsing with cold or warm
water, do not use chemical solvents or hot water.
The carbon filter should be replaced at least once a
year (art. no. DXDHF01)
11