Publicité
Installation Instructions – Aircraft Cable Mount Layout AC-MT
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
Before starting any work ensure that all sources of power are turned OFF . All work must meet local/national electrical
●
●
codes and be performed by a certified electrician.
Follow product label information and instructions before installing fixture. Retain installation instructions for future
●
●
reference.
Risk of fire, electrical shock, cuts and or other casualty hazards. This product must be installed in accordance with the
●
●
applicable installation code by a person familiar with the construction and operation of the product and the hazards
involved. Eaton's cooper lighting business assumes no responsibility for claims brought about by improper or careless
installation or handling of this product.
Risk of burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.
●
●
Replace lamp only with correct wattage and type of lamp marked on label. DO NOT exceed the maximum wattage listed
●
●
on the fixture label.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any sharp objects.
●
●
If supply wires are located within 3 inches of driver/ballast, use wire rated for at least 90°C (194°F).
N
otee:
Not all option available. Please consult your Cooper Lighting representative for availability. Specification and
dimension subject to change without notice.
2
WARNING
INSTRUCTIONS.
NOTICE
Installation Instructions – Aircraft Cable Mount Layout AC-MT
ADE141259 www.eaton.com
Publicité
