Infraworld VITALlight Notice De Montage Et D'utilisation page 8

ASSEMBLY NOTES:
1. Important:
Before starting-up remove the transport package, which protects the infrared lamp. To do so,
the cover grille of the radiator needs to be unscrewed (see fig. 1). Remove the foam packaging
used in transport. Then screw on the cover grille again.
Attention:
Do not touch the glass rod of the radiator with the fingers!
2. The radiator can be assembled in an infrared cabin through a wall aperture into the wall (see fig. 2
and fig. 3) or into the corner (see fig. 4 and fig. 5).
fig. 1
fig. 2
EN
8
fig. 3
50
55