Holman QCS Serie Instructions D'installation Et D'utilisation page 4

CLEANING
Preventive maintenance for your Holman toaster consists of the following
recommended cleaning procedures. To keep your toaster in its top
operating condition, these steps should be performed on a daily or weekly
as indicated.
A. Clean air intake on bottom of unit.
B. For lightly soiled conveyor belts, turn conveyor speed control to fastest
setting (100) and wipe with a damp cloth (daily) For heavily soiled
conveyors, turn conveyor speed control to fastest setting and wipe with
a light abrasive pad (as needed).
C. Turn main power saver switch to the OFF position. Disconnect unit from
power source.
D. After the unit cools, remove interior crumb tray (as shown below) and
clean. Slide crumb tray back into position.
E. Wipe exterior surface of unit.