Telefunken HCCV11 Mode D'emploi page 28

Note : Your steam station has been designed to function using tap water. If your tap water
is very hard water type, we advise you to mix 50% tap water with 50% of distilled water
available in most shops. Always check that the water tank is properly secured in the device
after filling. Do not use parfume, vinegar, anti-cale or others chemicals products for the
water tank to avoid damaging your appliance.
2. Using your appliance
Filling the water tank
Retrieve the water tank from its location,
open the water tank filler. Fill in the water
tank with a jug without exceeding the "MAX"
level of water indicator then close the water
tank filler before putting the water tank back
into its location.
Dry ironing
For dry ironing, turn the thermostat button
to the setting between position MIN and
based on your fabrics. Wait until the heating
light indicator switch off to start ironing.
Getting started
Put your steam station on a flat and stable
surface then plug the cable into a wall
socket. The press one time on the ON/OFF
button.
Steam ironing
For steam ironing, set the thermostat
button between position MAX and
based on your fabrics. Wait until the heating
light indicator switch off to start ironing,
ensure to press the steam joystick to get
steam
5
ENGLISH