Publicité
Les langues disponibles
Les langues disponibles
Key
Description
A
Air hose
B
In-line Filter
C
Tee Fitting
To begin using the tool:
1.
As a standard practice, drain water from the
air compressor tank and air lines prior to use
each day (reference your compressor
operators manual for detailed instructions).
2.
Turn on the air compressor and allow it to
build up pressure.
4.
Adjust the air compressor's regulator or the
supply line regulator to 90 PSI.
Loading grease:
This air grease gun is designed to load in three ways.
•
Using a standard 14oz. grease cartridge.
•
Loading the container tube with a filler pump.
•
Loading the container tube by bulk filling.
Cartridge loading (Figure 3)
a.
Remove the head of the grease gun from the container tube.
b.
Pull the plunger handle on the container tube completely out.
c.
Insert the grease cartridge (open end first) all the way into the container tube.
d.
Remove the seal or tab end from the end of the grease cartridge.
e.
Reassemble the head of the grease gun to the container tube.
f.
Press the handle release to release the plunger handle.
g.
Press the air vent valve to release any excess air
trapped inside.
Filler pump loading (Figure 4)
a.
Pull the plunger handle on the container tube completely
out.
b.
Put the filler plug into the filler pump socket.
c.
Fill the container tube by pumping the filler pump handle
(see filler pump instruction manual for instructions).
d.
Disconnect the container tube filler plug from the filler
pump socket.
e.
Press the handle release to release the plunger handle.
f.
Press the air vent valve to release any excess air
trapped inside.
TYPICAL
TYPICAL
Key
Description
D
In-line Oiler
E
Air Hose
F
Whip Hose
OPERA
OPERA
Always disconnect the
grease gun from the air
supply before loading
grease.
INST
ALLA
TION
INST
ALLA
TION
Key
Description
G
Quick Coupler
H
Male Connector
I
Air Tool
TING INSTRUCTIONS
TING INSTRUCTIONS
4 - ENG
Figure 1
Key
Description
J
Female Connector
K
Spray Gun
Figure 2
Figure 3
Figure 4
Publicité
