Fcc Radiation Exposure Statement; Troubleshooting - BUKRA V1 MAX Manuel De L'utilisateur

EN
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.

TROUBLESHOOTING

The speaker does not turn on?
Recharge your speaker.
The speaker does not turn off or does not respond
Reset your speaker. hold the power button for 6 seconds to automatically reset the speak-
er and turn it off.
There is no sound
Adjust the volume.
Make sure that your Bluetooth device is within range.
Ensure there is no obstacles in the way that can block/disturb the signal.
Check via the device's Bluetooth connection if the speaker is connected with the device.
There is poor sound quality?
Move the device closer to the speaker or try removing obstacles between them.
Cannot connect the device with the speaker?
Disconnect other connected devices and then try again.
You can force a disconnection by moving out of Bluetooth range (10 m).
In order to avoid harming the product performance, please do charge your device every 3
months at the least.
08