Connections; Caster Installation - Samson Auro D1800 Manuel Du Propriétaire

Connections

The Auro D1800 features balanced inputs and outputs with industry standard XLR
connectors. Whenever possible, use high quality balanced connections to other
equipment to suppress interference. See the wiring diagram below for Auro D1800
connectors.
XLR to XLR Balanced
XLR to Balanced 1/4-Inch

Caster Installation

• Locate one caster and four each of the
supplied screws and lock washers.
• Hold the caster in place and hand start
the screws. Be careful to ensure that
the screws are on the proper thread
chase. Do not push down on the
screws, as it could dislodge the internal
threaded t-nuts.
• Use a screwdriver to tighten the four
screws.
• Repeat the steps above for the remain-
ing three casters.
10
Auro D1800