Sunex Tools SX232B Instructions De Fonctionnement

Operating Instructions • Warning Information • Parts Break down
SPECIFICATIONS
Max. Free Speed ....................... 20,000 RPM
Collet Size ................................................1/4"
Average Air Consumption ...................4 CFM
Air Inlet .............................................1/4" NPT
Air Supply Hose Size ........................ 3/8" I.D.
Length .................................................... 6.38"
Weight ..................................................... 1 LB
Sound Level .................................... 93.6 dBA
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
SX232B: Parts Breakdown & Operating Manual
WARNING
SX232B
1/4" DRIVE ANGLE
DIE GRINDER
WARNING
RATED RPM OF ACCESSORY USED
RPM RPM RPM
MUST EXCEED THE MAXIMUM TOOL
RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE PROTECTION
WHEN OPERATING OR PERFORMING
MAINTENANCE ON THIS TOOL
ALWAYS WEAR HEARING
PROTECTION WHEN OPERATING
THIS TOOL
AVOID PROLONGED EXPOSURE
TO VIBRATION
© Copyright 2016, Sunex Tools
®
Rev. 6/27/16