Lindy 40972 Manuel Utilisateur page 6

User Manual English
Adjusting the height of the trolley column
To adjust the height of the column in an upward
direction, unlock the column by rotating the
locking wheel anticlockwise. Position the column
at the desired height and rotate the locking
wheel clockwise to confirm and lock the position.
To adjust the height of the column in a
downward direction, unlock the column by
rotating the locking wheel anticlockwise. Pull the
column upwards to release the locking peg, then
ensure this is pushed in until the desired position
is confirmed. Release the locking peg when
inside a hole of the column and then secure the column at the desired height by rotating the locking wheel
clockwise.
Adjusting the height of the handles or device
shelf
To adjust the height of the handles, loosen all
bolts using the Hex key, re-position and then re-
tighten all bolts.
To adjust the height of the device shelf, loosen all
bolts of the shelf holding plate using the Hex key,
re-position and then re-tighten all bolts.
Attaching the device shelf
Fit the device shelf to the shelf holding plate and
secure by tightening all screws using a
screwdriver (not included).