Axis Communications S10 Serie Guide D'installation page 9

Connect the Cables
Important
Before you begin any of the procedures in this section, read the safety information that
shipped with your computer. For additional information, seewww.axis.com
Note
Some devices may not be included if you did not order them.
1. Connect the keyboard, mouse and monitor. The connectors on the back of your system
have icons indicating which cable to plug into each connector. Be sure to tighten the
screws (if any) on the monitor's cable connector.
2. Connect the system's power cable(s) to the system and, if a monitor is used, connect
the monitor's power cable to the monitor.
AXIS Camera Station S10 Recorder Series
9