Motion Computing FlexDock Guide D'installation page 3

Locking the Motion Tablet PC and Motion FlexDock
The Motion FlexDock has an opening over the universal security slot on the side of
the Motion Tablet PC through which you can insert a lock (not provided) into a
universal security lock slot. This provides physical asset security when the Motion
Tablet PC is docked in the Motion FlexDock.
(Optional) Connecting an Optical Disc Drive
Before connecting an AC-powered optical disc drive (such as the Motion USB
DVD/CD-RW) to the Motion FlexDock, verify that this drive is connected to AC
power and that the device is turned on. Then connect the drive's USB cable to the
Motion FlexDock. For more information, see the installation guide packaged with
the drive.
(Optional) Connecting an External Monitor
You can connect the Motion FlexDock to a VGA monitor
for presentations or to mirror or extend your display to
another monitor. To mirror a display means to clone or
show the same information on both screens. Extending a
display provides an extended work area, allowing you to use
both screens. For more information about setting up the
external monitor, see the online user guide on your Motion
Tablet PC or go to the support page of the Motion
Computing website at www.motioncomputing.com/support.
1. Plug the monitor cable into the VGA port on the Motion FlexDock.
2. Plug the monitor into a power outlet and turn it on. Windows XP will recognize
the monitor and search for its hardware driver. (You may need to install the
driver from the CD supplied by the monitor's manufacturer.)
3. To mirror the Motion Tablet PC display, do the following:
a. Open the Motion Dashboard.
b. Select the Mirror Display radio button under External Monitor. This
setting automatically creates an identical display on the external monitor.
4. To set up an extended display, do the following:
a. Open the Motion Dashboard.
b. Select the Extend Display radio button under External Monitor. Use this
feature when you want to simultaneously open applications on two
monitors and significantly expand your workspace without hiding open
documents under layers of other work.
(Optional) Connecting Microphones, Headphones or Speakers
You can connect powered speakers or headphones to the audio out/headphone jack
and a standard analog microphone to the microphone jack.
(Optional) Connecting an Ethernet Connector
To connect a LAN, use an RJ-45 Ethernet connector and not an RJ-11 telephone
connector (which will damage the RJ-45 Ethernet port on the Motion FlexDock).
I M F
NSTALLING THE OTION
D LE-S
LEX OCK FOR THE ERIES
M F D - LE-S
OTION LEX OCK
3
ERIES