Schenker VIA 14 Guide Utilisateur Concis page 10

18. Run the Intel® Optane™ Memory and Storage Management
application.
19. Click Enable Intel® Optane™ Memory.
Figure 2 - Intel® Optane™ Memory and Storage
Management - Enable Intel® Optane™ Memory
20. A warning will pop up to notify you that all data on the Optane
Memory Module will be erased, and if this is OK then click
Enable.
21. The system will prepare and enable the Optane drive, and when
finished you can then click Restart.
22. The system will then optimize the Optane Memory upon restart.
23. Run the Intel® Optane™ Memory and Storage Management
application.
24. The system status will then be displayed.
6
Disabling Intel® Optane™
If you wish to disable an existing Intel® Optane™ setup
then follow the procedure below to do so.
1. Run the Intel® Optane™ Memory and Storage Management
application.
2. Click Intel® Optane™ Memory and then click Disable.
3. Click Disable when you see the following message.
Figure 3 - Intel® Optane™ Memory and Storage
Management - Disable
4. Restart the computer to complete the process.
5. Run the Intel® Optane™ Memory and Storage Management
application.
6. The Intel® Optane™ Memory Status is indicated in the
Window.