Wiring - Marechal Electric EVO Mode D'emploi

►WIRING

☼
The contact terminals are spring‐assisted to prevent
loosening due to strand settlement, vibration, or thermal
cycling.
• Remove an adequate length of cable outer sheath,
according to the accessory used. The cable sheathing must
extend through the cord grip into the accessory as required to
achieve the intended sealing and cord gripping performance.
• Strip conductors' insulation to the lengths indicated. A
crimped lug may prevent the dispersion of strands of flexible
conductors.
• Do not back terminal screws completely out;
• Fully insert the conductor and tighten the terminal screws to
the torque indicated.
IS 39 [EVO] Rev D.0 - 2022-02
• EVO has up to 7 contacts, marked [1]
[2] [3] [4/N] [5] [6] and Earth. The use
assigned to contacts 1 to 6 is left to the
integrator. These contacts can be used
for power or control.
11/50 . ,