MUCAR BT200 Mode D'emploi page 4

04
Insert the MUCAR BT200 into Vehicle's OBDII Port
As shown below, there are 5 common locations for OBDII port. Insert the MUCAR BT200,
the device is power on if the light turns green.
05
Connect the App and Device via Bluetooth
After inserting the device into vehicle's OBDII port, open the Mucar app and start the
diagnosis. (It will automatically connect with the Bluetooth in the device during the
diagnostic process).
Hi, mucar!
What are you looking for?
Bluetooth Connection
EN