Control Lock; Door Ajar Alarm; Delay Start/Vacation Mode - Lynx LM15ICER Manuel D'utilisation, D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING YOUR ELECTRONIC CONTROL
Turning your ice machine On and Off:
If your appliance is on, "ICE" will be displayed.
To turn the appliance off, push and hold the "ON/
OFF" icon for 3-seconds. The display will show
"OFF" .
NOTE
When turned off, the ice machine will complete its
current ice production cycle then shut off.
The drain pump (if equipped) and the interior light
will still be functioning during the OFF mode. To
turn the appliance back on, press and hold the "ON/OFF"
icon for 3-seconds, the display will show "ICE".
WARNING
!
Turning the ice machine "OFF" will only terminate the
ice production, it does not remove power from the ap-
pliance. Always unplug the power cord from the wall
outlet before servicing the unit.

Control Lock:

The user interface can be locked to avoid uninten-
tional changes from things like cleaning. To lock
the appliance, push and hold the "LOCK" icon for
5-seconds. The "LOCK" icon will flash 3 times, then change
to steady back-lit. To unlock the user interface, press and
hold the "LOCK" icon for 5-seconds, and the back-light will
turn off.
NOTE
The "LOCK" icon is the only active key in this mode. If other
icons are pressed while in the lock mode the "LOCK" icon
will flash 3 times, and an audible tone will sound, to remind
the user the appliance is in the lock mode.

Door ajar alarm:

ICE
If the door is open, or not closed properly for 5
minutes the "DOOR" indicator will illuminate and
flash and an audible tone will sound. The audible
alarm can be muted by pressing the "Lock" keypad.
This alarm condition can be reset by closing the
door or momentarily pressing the "ON/OFF" icon,
OFF
(i.e.-if you are cleaning the storage compartment, etc.). The
alarm will recur in 5 minutes if the alarm condition persists.
ICE

Delay start/Vacation mode:

Your ice machine is equipped with a delay start function.
This feature can be used to temporarily shut the appliance
off for 1, 4, 6, or 8 hours or days. Upon completion of the
selected delay period, the appliance will resume operation.
This is ideal for temporarily stopping ice machine noises or
to save water and electricity if you are away from home but
want fresh ice upon your return.
To enter the delay start mode, press the "CLOCK"
icon while the appliance is in "ICE" mode. This will
delay the next harvest by the time displayed. Each
additional press of the "CLOCK" icon will add time,
from 1, 4, 6, or 8 hours, to 1, 4, 6, or 8 days. The next
press after 8 days will leave delay set
mode. After the desired time has been
selected, press the "ON/OFF" icon for 2 seconds
to accept, your unit will shut off and a clock icon
and your selected time will be displayed. When the
selected time has elapsed, normal ice production will
resume.
To cancel the delayed start, press and
hold the "ON/OFF" icon until the appli-
ance enters OFF, then press and hold
the "ON/OFF" icon again until the appli-
ance enters "ICE" mode.
1
CARE AND USE/INSTALLATION
DOOR
hours
days
4
6
8
OFF
ICE
15

Publicité

Table des Matières
loading

Table des Matières