Télécharger Imprimer la page

Beacon 1356914 Mode D'emploi page 14

Publicité

Les langues disponibles

Les langues disponibles

side chamber of your iKayak contact HO Sports Customer Service
department using the provided contact info.
REPAIRS/REPAIR KIT
Your Beacon comes with a repair kit to repair any leaks that may
develop in the floor of the iKayak. The repair kit comes with special
glue and a piece of material used to do the patch and a wrench for the
floor valve.
Most punctures will be pin hole sized or small cuts. For these sized
repairs, a penny sized patch should work. Ensure your patch has
adequate distance between the puncture and the edge of the patch.
With the air out of the floor, apply glue to the puncture area as well as
the patch and apply the patch. (for best results, lightly scuff area where
patch will be applied to give glue some texture to bond to). Allow patch
to dry for at least 15 minutes before adding air. Allow glue to cure for
24 hours to increase chances of the patch bonding.
13

Publicité

loading