Installation
Fasteners:
• Choose fasteners suitable for the mounting surface, the
weight of the reel, and the force of pulling the cord. Use a level-
ing device for proper positioning.
• Use hex head fasteners up to 5/16" (8 mm) in diameter,
• with a (minimum) ½" (12.5 mm) hex head.
• Mounting fasteners are not included.
Wall installation:
1.
Recommended height: 5 ft. (1.5 m) to 8 ft. (2.5 m)
2.
On hose reel, locate the pivots at bracket ends.
3.
Remove screws that hold bracket pivots in reel.
Retain screws. Remove pivots from reel and bracket.
4.
Mount bracket to surface. Mounting fasteners not included.
5.
Re-install reel to bracket with the pivots. Replace screws.
Operation
Before Each Use:
• Check for frayed or damaged wires before each use.
Dispensing Cord From Reel:
• Always pull the cord from the reel by the cord itself.
Do not attempt to extract the cord by pulling on tools
attached to the cord
• Ensure that the reel is operating properly by listening
for a "clicking" noise. This noise should be heard for every half
revolution of the drum
Latching the Reel:
The E8140503 retractable cord reel can lock the cord at approxi-
mately 18˝ intervals. Each latching interval is announced by a
series of 5 "clicks". This "ratcheting" sound lets you know that the
reel is in the latching zone.
• To latch the reel, simply pull the cord to the desired length
and listen for the "ratcheting" sound (Do not pull more than four
"clicks" in the desired zone). Allow the cord to retract. The reel
will automatically lock into place.
Warranty:
ONE YEAR LIMITED WARRANTY*
LEGACY MANUFACTURING COMPANY ("LEGACY") warrants that this equipment, ( NOT including couplers, whip hoses, and wear items such as seals and
springs ), will be free from defects in material and workmanship for a
period of one (1) year from the date of purchase, under normal use.* LEGACY'S sole obligation under this warranty is
limited to replacing or repairing, free of charge, any equipment that proves to be defective under normal conditions and use accord-ing to the recommendations of LEGACY. To
obtain repair or replacement, the equipment must be shipped to a LEGACY authorized Warranty and Service Center during the warranty period, transportation charges
prepaid, with proof of date of purchase. In the event of repair or replacement, the warranty period shall not be extended beyond the original warranty period.
This warranty is extended to the original purchaser only and is not transferable. This warranty does not apply to normal wear items such as packings, seals, tips
and filters, or to equipment damaged from accident, overload, abuse, misuse, negligence, faulty installation or abrasive or corrosive materials, or to equipment repaired or
altered by anyone not authorized by LEGACY to repair and alter equipment. No allowance will be granted for any repairs or alterations made by a purchaser without
LEGACY'S prior written con-sent.
LEGACY WILL BEAR NO OTHER EXPENSE, INCLUDING BUT NOT LIMITED TO LABOR AND MATERIAL COSTS (OTHER THAN THOSE SPECIFIED
HEREIN) OF ANY KIND, AND YOUR EXCLUSIVE REMEDY, IN LIEU OF ALL INCIDENTAL, SPECIAL, CONSEQUENTIAL OR ANY OTHER DAMAGES, INCLUDING, BUT
NOT LIMITED TO, DAMAGES FOR NEGLIGENCE, IS LIMITED TO REPAIR OR REPLACEMENT AS HERETOFORE DESCRIBED. THE FOREGOING WARRANTIES ARE
IN LIEU OF ALL OTHER REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED OF ANY KIND REGARDING ANY EQUIPMENT, INCLUDING BUT NOT LIMITED
TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE. IN NO CASE SHALL LEGACY BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER
LEGAL THEORY.
Unless modified in a writing, signed by both parties, this Limited Warranty is understood to be the complete and exclusive agreement between the parties,
superseding all prior agreements, oral or written, and all other communications between the parties relating to the subject matter of this Limited Warranty. Any action for
breach of warranty must be commenced within twelve (12) months following the end of the warranty period.
* If this equipment contains a hose, the hose is warranted for ninety (90) days only. The remaining portions of this equipment are warranted for one (1) year, as described
above. Contact us at service@legacymfg.com or legacymfg.com for ordering and installation instructions.
Ceiling / Overhead Installation:
Important: Use of the third mounting hole is required for overhead
installation to prevent reel from becoming unmounted while pulling the
cord.
1.
Perform steps 1-3 for "Wall Installation"
2.
After completing steps 1-3 from "Wall Installation",
install a third fastener through the bracket's center hole.
3.
Re-install reel to bracket with the pivots. Replace screws.
Adjusting the Cord Stopper:
1.
Pull cord to desired length.
2.
Loosen screws on both sides.
3.
Tighten the stopper at desired position.
Power Overload (Breaker Trip):
• In the event of a power overload, your reel has a built-in
circuit breaker. To reset the circuit, simple press the red button
on the side of your reel.
Troubleshooting the Reel:
• When troubleshooting the reel, never open the reel case.
The internal spring system is under high tension; damage or
personal injury may result.
After Each Use:
• To avoid damage or personal injury, always return the cord
to the reel in a controlled manner.
• Remove tools from extension cord after use.
Do not allow tools to hang from cord.
Replacement Parts
Replacement parts are not available for this unit. For service,
please call Legacy
at:
(319) 373-7305 or email us:
service@legacymfg.com