Residual Risks; Vibrations (Hand Arm Vibrations); Safety Instructions - Altrad ATIKA VT 32 Z-2 Notice Originale - Consignes De Sécurité - Pièces De Rechange

 as power tiller
 on plastered or gravelled areas
Risk of injuries existing!
 The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included in
the instructions.
 The relevant accident prevention regulations for the
operation as well as the other generally acknowledged
occupational medicine and safety rules must be complied
with.
 Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
 Arbitrary modifications on the scarifier / lawn aerator exclude
a liability of the manufacturer for damages of all kinds
resulting from it.
 Only persons who are familiarised with the device and
informed about possible risks are allowed to prepare,
operate and service this device. Repair works may only be
carried out by us or by a customer service agent nominated
by us.
 The machine may not be used in a potentially explosive
environment or be exposed to the rain.

Residual risks

Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
 Risk injury of hands and feet if they come close to or under
the rotating parts.
 Risk of injury of fingers and hands during assembly and
cleaning activities on the scarifier drum.
 Stones and soil may be thrown off.
 Danger resulting from electric current, if improper connecting
wires are used.
 Touching live parts of opened electrical components.
 Impairment of hearing when working on the machine for
longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
Vibrations
(hand arm vibrations)
Hand arm vibration: a = 3,61 m/s²
h
Measuring uncertainty K = 1,5 m/s²
The indicated vibration emission level has been measured
according to a standardised test method and can be used to
compare power tools.
It can also be used for an initial estimate of the vibration
exposure.
13
The actual vibration emission level during the use of
the machine may differ from that indicated in the operating
instructions or indicated by the manufacturer.
This may be caused by the following factors to be minded before
and during the use:
 Proper use of the machine
 Proper condition of the machine for use
 Is the sharpness of the cutting blade in order or the cutting
blade correctly installed?
 Handles and optional anti-vibration handles properly
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks taken.
In this way, the extent of exposure can be considerably reduced
over the entire work time. Minimise the risk caused by
vibrations. Maintain this machine according to the instructions in
the manual. If you intend to use this machine frequently, contact
your local authorised dealer and purchase anti-vibration
accessories if required. Avoid the use of this machine at
temperatures under 10°C. Create a work schedule in order to
minimise vibration exposure.
!

Safety instructions

Scarifiers / lawn aerators can be dangerous
!
when used improperly. The use of electrical
tools requires the observation of basic
safety precautions to eliminate risk of fire,
electrical shock and personal injuries.
Before commissioning this product, read
and keep to the following advice. Also
observe the preventive regulations of your
professional association and the safety
provisions applicable in the respective
country, in order to protect yourself and
others from possible injury.
Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.
Personal safety
 Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
 Be attentive. Be careful what you do. Behave sensibly when
working. Do not use the device when you are tired or under
the influence of drugs, alcohol or medicaments. One moment
of carelessness when using the device can result in serious
injuries.
 Do not use the device for purposes it is not intended for (see
"Intended use").
 Wear protective clothing: