Publicité
Les langues disponibles
Les langues disponibles
WARNING
!
• Study, understand, and follow all instructions
before operating this device.
• Do not exceed rated capacity.
• Use only on hard, level surface.
• This is a lifting device only. Immediately after
lifting, support the load with appropriate means.
• Lift only on areas of the vehicle as specified by
the vehicle manufacturer.
• No alterations shall be made to this product.
• Only attachments and/or adapters supplied by
the manufacturer shall be used.
• Failure to heed these markings may result in
personal injury and/or property damage.
SPECIFICATIONS
Model
18126C
18206C
Air Vent Screw/Filler Plug
(ref. Parts illustration for
location)
Carry Handle
Release Valve
Capacity
Base Size (L x W)
12 Ton
8-1/8" x 5-7/8"
20 Ton
9" x 6-3/4"
Saddle
Handle Sleeve
Figure 1 - 18126C & 18206C Nomenclature
WARNING
!
To avoid crushing and related injuries:
• Never work on, under or around a load supported
only by hydraulic jack.
• Chock unlifted tires in both directions.
• Do not use this device to lift, level, lower, support nor
move a house, mobile home, travel trailer, camper or
any building structure.
• Be alert and sober when using this product. Do not
operate under the influence of drugs or alcohol.
Min. Height
9-5/8"
9-5/8"
Air Motor
3
X
Max. Height
18-7/8"
18-7/8"
Air Hose
Lift Control Valve
Handle
Publicité
