Publicité
Les langues disponibles
Les langues disponibles
WALL MOUNT INSTALLATION
Estimated Assembly Time:
Tools Required for Assembly
1. Remove Mounting Bracket (D) from back of Fireplace (C) by unscrewing the two screws at the top of
the unit. Then tip mounting bracket (D) away from the back of the fireplace and set aside for future
use.
1
C
2. Remove the Base (B) of Fireplace (C) by unscrewing three screws at the rear base of the unit.Then
pull the base away from the fireplace. You can store the base in a safe place for future use. It is also
recommended to re-install the three screws into the fireplace for safe keeping.
2
OPTION 1
(For freestanding installation refer to page 10)
50 minutes
(not included): Phillips screwdriver,measuring tape, level, electric drill.
D
6
1
B
D
C
B
2
Publicité
