INSERT INSTRUCTIONS
18. Spread your choice of White Rocks (S) or Acrylic
Glass (T) onto the emberbed area.
Re-Install the face frame.
Align the front frame with the body, plug in the wire
bundle to the control panel.
Install the four thumb screws
ASSEMBLY INSTRUCTIONS
19. With the help of another person, position insert (L)
into opening of mantel assembly.
Note: DO NOT plug insert (L) into power outlet
yet.
CAUTION: DO NOT slide insert on top of wood to
avoid scratching wood surface.
20. Reinstall the insert (L) to the opening of the mantel
with two screws removed at step 2 on the left side
and on the right side of the insert (L).
Hardware Used
AA
Allen Wrench
(CONT'D)
x 1
12
18
19
20
T. Acrylic Glass
S. White Rocks
L
L