General Overview - Guest CHARGEPRO Serie Manuel Du Propriétaire Et Guide D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY INSTRUCTIONS
7
Charger Location & DC Connection
14. CHARGER LOCATION
CAUTION
a.Locate charger as far away from batteries as possible.
b. Never place a charger directly above a battery being charged; gases or fluids from battery
will corrode and damage charger.
c. Do not operate charger in an enclosed area or in an area with restricted ventilation in any way.
d. Never allow battery acid to drip on charger when reading electrolyte specific gravity
or filling a battery.
e.Do not set a battery on top of charger.
f. Do not install on or over combustible surfaces.
15. DC CONNECTION PRECAUTIONS
CAUTION
a.Connect and disconnect DC output cables only after removing AC cord from electric outlet.
Never allow cables to touch each other.

General Overview

The new Guest
®
ChargePro
On-Board Marine Battery Charger series has been fully redesigned
and incorporates new features not seen in prior generations.
Every Guest
charger is fully automatic and has dedicated battery charging, sensing and control
®
per bank. Designed to maximize individual battery performance, extend battery life and keep
you on the water longer. The easy to read LED user display indicates the status of each battery
bank through the charging process.
Notably different: The new ChargePro
Series boasts a low profile flangeless extruded aluminum
housing which is sealed with molded gaskets and heavy duty end caps for 100% waterproof
performance to IP67. This new construction design delivers an increase in charging and thermal
management performance. The new ChargePro
durability and ease of installation over prior generations of older technology epoxy filled plastic
body chargers.
Available in 8 models for 12, 24, 36 and 48 volt systems (model specific).
Standard Features Include:
1.
2.
4.
5.
1. Expanded LED display
2. Heavy duty strain relief
3. Wiring and battery fault status
4. In-line safety fuses
5. Extruded chassis fins and raised mounting pads for increased cooling
GENERAL OVERVIEW
Series is up to 40% lighter while increasing
3.
8

Publicité

Table des Matières
loading

Table des Matières