Included Items; Technical Data; Safety Advice; General Safety Advice - OWIM Powerfix Profi Z31780 Instructions De Montage, D'utilisation Et Consignes De Sécurité

Support pour meuleuse d'angle
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Vice adjustment thread (vice)
23
Guide bolt(vice)
24
Guide(vice)
25
Square nut (guide rail)
26
Stop (vice)
27
Stop (vice rear jaw)
28
Washer (fastening bolt vice rear jaw)
29
Fastening bolt (vice rear jaw)
30
Hexagonal socket head screw (fastening of
31
mounting piece)
Base plate
32
Saddle
33
Washer (hexagonal socket head screw saddle)
34
Hexagonal socket head screw (fastening of
35
saddle)
Mount
36
Clip
37
Rear mounting piece
38
Nut (mounting bolt guard mount)
39
Mounting bolt (guard mount)
40
Vice
41

Included items

Check that all the items and accessories are pre-
sent and that the product and its all parts have no
defects immediately after unpacking. Do not as-
semble the product if any of the included items list-
ed below are missing.
1 x Base plate
1 x Saddle
2 x Washers (hexagonal socket head screw saddle)
2 x Hexagonal socket head screws (fastening of
saddle)
2 x Hexagonal socket head screws (fastening of
mounting pieces)
1 x Mount
1 x Adjustment screw with rubber buffer (long)
2 x Mounting bolts M10 (angle grinder)
2 x Mounting bolts M8 (angle grinder)
2 x Mounting bolts M6 (angle grinder)
2 x Nuts (mounting bolts M10 angle grinder)
2 x Nuts (mounting bolts M8 angle grinder)
2 x Nuts (mounting bolts M6 angle grinder)
1 x Handle
1 x Metal rod
1 x Safety guard
1 x Adjustment screw with rubber buffer (short)
2 x Mounting pieces
2 x Plastic location pieces (mounting pieces)
2 x Fastening screws (vice)
1 x Vice adjustment thread (vice)
1 x Rotary adjustment knob (vice)
1 x Guide bolt (vice)
1 x Guide (vice)
1 x Clip
3 x Square nuts (guide rail)
1 x Stop (vice)
1 x Stop (vice rear jaw)
2 x Fastening bolts (vice rear jaw)
2 x Washers (fastening bolts vice rear jaw)
1 x Mounting bolt (guard mount)
1 x Nut (mounting bolt guard mount)
1 x Nut (guard mount)
3 x Distance pieces (60 / 90 / 130 mm)
3 x Washers (mounting bolt)
2 x Plastic bushings M6
2 x Plastic bushings M8

technical data

Max. dimensions of the workpiece:
Tubes:
round tube: 30 x 2 mm (ø x t)
other shapes: 30 x 2 mm (W x t)
Bars:
round bar: ø 12 mm
other shapes: 12 mm (W)
Plates:
45 x 2 mm (W x t)
Material / Weight:
Material: Cast aluminium, cast iron (main material)
Weight:
2.9 kg (±5%)

Safety advice

WaRnInG!
Read all the safety advice
and instructions. Failure to observe the safety
advice and instructions could result in electric shock,
fire and/or serious injury.

General safety advice

GB/IE
13

Publicité

Table des Matières
loading

Table des Matières