ChangBERT 102714-A Manuel D'utilisation page 7


If the pots/pans are used without being cleaned, as this may result in
discoloration or stains.

Do not use benzene, thinner, scrubbing brush or polishing powder to
clean the induction cooker.

Wipe down the unit using a dish washing agent and a damp cloth

Use vacuum cleaner to suck up dirt from the air intake and exhaust
vent.

Never run water over the unit (If water gets inside it may cause
malfunction).
Any other servicing should be performed by an authorized service
If LED-display shows the error code, please reference to the solution
as following:
Error Code
"---" on display
and emitting a
sound
E1
WARNING
representative.
Error Code List:
Cause and Solution
Unsuitable pot or no pot on the induction cooker.
Voltage under 75 V.