Publicité
Les langues disponibles
Les langues disponibles
► Operating
• Switch on or off
Press and hold the multifunction key for about 3 seconds, the blue indicator light is displayed. It shows the
earphone is power on. Press and hold the multifunction key until the red indicator light is displayed. It shows the
earphone is power off.
• Pair the headset
If your phone or tablet supports the A2DP Bluetooth profile and has a music player feature, you can make and
receive calls and listen to the music with the YBT100.
1 - Ensure that your phone or device music is On and the headset is Off.
2 - Press and hold the multifunction key for about 5 seconds until the Red indicator light and the Blue indicator
light starts to flash quickly.
3 - Activate the Bluetooth feature on your phone or tablet and set it to search for Bluetooth devices.
4 - Select the headset YBT100 from the list of founded devices on your phone tablet.
5 - Enter the passcode 0000 to pair and connect the headset to your device. If your device does not have a
passcode, it will pair with the headset automatically.
6 - When the headset is connected to your phone or tablet and is ready for use, the red indicator will be off and the
blue indicator light will flash every 5 seconds.
• NFC connecting :The YBT is compatible with NFC devices. Put your smartphone near the NFC zone on the
remote until the connection is confirmed.
Note : Bluetooth 4.0 makes possible the dual pairing function. This allows you to pair 2 devices to the headset
together. This will help you to listen music from one device and be able to answer to your phone in case of a call.
Note that you can't use two devices simultaneously.
• Listen to music
To listen to the music, pair and connect the headset to a device that supports the A2DP Bluetooth protocol, use the
playback controls on the connected device as shown on the tab bellow.
Play / Pause
Next
Previous
Volume +
Volume -
If you answer or make a call while listening to the music, the music will pause until you end the call.
• Receiving a call
Short press the multifunction key to receive an incoming call.
• Ending a call
Short press the multifunction key to end a call.
• Making a call
When you make a call via the mobile phone, the call will be transferred to your headset automatically, depending
on the phone setup. If your phone does not support this function, short press the multifunction key to received an
incoming call.
• Voice call activation*
If your phone supports this feature with the headset, when no call is in progress, press and hold the multifunction
key for about 2 seconds. Proceed as described in your phone user guide
• Redialing the last number*
To redial the number you last called (if your phone supports this feature with the headset), when no call is in
progress, press the multifunction key twice.
• Rejecting a call*
Press the multifunction key twice to reject a call.
• Note
The functions with mark * must be supported by your mobile phone. For more information, refer to the user manual
of your mobile phone
Function
Press the multifunction key
Press the
Press the
Press the + key to increase the volume
Press the - key to decrease the volume
Description
key
key
English
Publicité
