Publicité
Les langues disponibles
Les langues disponibles
oPeRATIon
1.
Set volume control to minimum level:
Before switching on the device, turn the Volume Control -4- to minimum position (control to the left).
2.
Power On:
After all connections have been completed activate the device with the ON/OFF Button -1-.
3.
Volume Control:
Adjust the volume with the Volume Control -4-.
SoUnD conTRol
Use the Bass -5- and Treble Controllers -6- to lower or raise the low and high frequencies. The ideal adjustment depends on the given accomo-
dations. A heavily dampened room requires raised high frequencies whereas a reverberant room requires a reduction of the high frequencies. If
the monitors are positioned near a wall or corner the low frequencies will be raised. If the monitors are positioned in a bigger distance the low
frequencies will be lowered.
TechnIcAl InfoRMATIon
Reloop Wave 5:
- RMS power:
2 x 30W
- Type: Active:
Active 2-way system
- S/N Ratio:
> 75dB
- Speaker:
13,34 cm (5,25") bass, 2,54 cm (1") tweeter
- Frequency range:
35 Hz - 20 kHz
- Impedance:
8 Ohm
- Connections:
RCA, 3.5 mm Jack
- Dimensions:
232 x 320 x 180 mm
- Weight:
8.5 kg (pair)
Subject to alterations!
Illustrations similar to original product!
Misprints excepted!
ReloopTrademark
Global Distribution GmbH, Schuckertstr. 28, 48153 Münster, Germany, Fax +49.251.60 99 368
9
Publicité
