Fisher & Paykel DCS ADR2-48 Guide D'utilisation page 14

INSTALLATION
5. Your LP tank will be installed in the recess provided in the bottom of the right compartment (Fig. 14).
6. When connecting the LP tank to your grill be certain that all connections are tight. Once gas connections are made, test for
gas leaks.
7. On models so equipped, install the two (2) racks provided into the opening by sliding them onto the rollers on the sidewalls
of the center cavity (Fig. 15).
Tank Receptacle
Fig. 14
Rack & Rack Cover
Drain drawer
Fig. 15
12