Front View; Rear View - Nicols DP 615II Guide D'utilisation

Overview

1.1 Front View

1. 2x8 LCD Display: Shows the current activities or adjustments of menus.
2. Channel LEDx6: These LEDs show the activities of corresponding channels.
3. DMX LED: This LED blinks when DMX signal is present.
4. Channel Buttonx6: These buttons are used to change the intensity of corresponding channel.
5. MENU Button: Tap this button to enter basic menus or sub-menus.
6. UP Button: Tap this button to scroll through menus or to increase values .
7. DOWN Button: Tap this button to scroll through menus or to decrease values .
8. ESC Button: Tap this button to go back last menu level or to leave menu system.
<In Beginning menu, this button is used to reverse the change direction of channel setting>
9. Circuit Breakerx6(10A)

1.2 Rear View

1.Power Input: AC 220V~50/60Hz,60A max.
2.Terminal Output:
Single phase: 10A/CH., Total 60A
Three phase: 10A/CH., Total 20A per phase
3.DMX Output: This connector sends DMX signal through to the next DMX device.
4.DMX Input : This connector accepts DMX input signal.
5.Analogue Input: DC 0-10V pulse signal.
*(For details, please refer to the wiring diagram printed on the top cover.)
PAGE 11 OF 13