Midland Street Guardian GPS+ Mode D'emploi page 29

Recharge
To recharge the car camcorder connect it to the PC with its USB cable.
The camera however, must be always powered while in use : the built-in battery is used only to
correctly save the file before turning off the device. In standby conditions the battery life is few
minutes, so it must be always used while powered through the cable.
Battery indicators as below:
Full
Basic operation instructions about photo/video/playback
1
5
6
7
8
9
10
1. Mode
2. Resolution
3. IR LED
4. REC time
5. Loop REC
Half
2 3
11
6. Motion detection
7. HDR
8. G-Sensor
9. Exposure compensation
10. Memory Card
9
Low Empty (unit turns off)
12
11. Date
12. Time
13. Battery
14. Audio REC
4
14
13