Installation And Use; Stopwatch - Casselin CG180S Mode D'emploi

5.2 Installation and use

WARNING
Installation and maintenance must be only carried out by qualified technician.
Never let your appliance operating without supervision.
Always operate with dry hands.
Operating never move or tilt your appliance.
OPERATING INSTRUCTIONS
STARTUP
Remove all protective foils and packaging material prior to usage.
Place the appliance on a flat, solid, and heat-resistant surface, on its vertical position. Never install your
appliance on inflammable surface.
Do not install the appliance near open fireplaces or all hot sources.
Do not place the appliance near inflammable material.
The plug and the cable must be protected by a circuit breaker of 16 A. Connect the appliance directly to a wall
plug socket. The use of adaptors, multiple sockets and/or extensions is not recommended.
Prior first use let the appliance in function until all smokes and bad odours disappear.
Then put the appliance off, let it cool down and rinse it thoroughly with hot soapy water with a gentle humid
cloth. Never use cold water on hot plates that could lead to a thermic chock.
USER INSTRUCTIONS
Plug your appliance and put the knob on/off, the red light goes on.
Temperature must be between 60° and 300°C. We recommended to use the appliance with the temperature
fixed on 220°C
Once reached the desired temperature the red light goes off.
When the temperature goes down the appliance goes on warming and the red light goes on.
The plate do need special operation before first use.
TIMER
Count up: stopwatch
Count down: timer
'-' and '+': setting the timer

Stopwatch

Start press '+' for the stopwatch. To stop, press '+'.
5 beeps to signal the stopwatch stop.
Timer
Pressing '-' and '+' simultaneously displays the default value: 10sec.
Press simultaneously '-' and '+' (2 beeps).
The time flashes, you can set the desired time (0.1 - 19.59 mm) with '-' and '+'.
Wait for the display to turn off then press '-' to start the timer.
5 beeps to signal the timer stop.
ADVICE
Your appliance is provided with an overheating protection. When this protection has been activated you must
let your appliance cool down.
If overheating protection is stated regularly, contact your dealer or our after-sales service.
To reset the appliance, press the reset button located on the back side of the appliance. You must unscrew
the plastic protection (counterclockwise), press the reset button and replace the plastic protection (clockwise).
14