Télécharger Imprimer la page

Powerfix Profi HG02905 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
DRILL STAND
˜ Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. Familiarise yourself with the product
before using it for the first time. In addition,
please carefully refer to the operating instruc-
tions and the safety advice below. Only use the
product as instructed and only for the indicated
field of application. Keep these instructions in a
safe place. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
˜ Intended use
The product is designed for commercial drills and
is suitable for placing exactly defined holes at
right-angles into wood, metal and ceramic tiles.
It is possible to mount the work-piece securely
during drilling. Consult the manufacturer's
operating manual before using the drill. The
product is not intended for commercial use.
˜ Parts description
Drill stand:
Bolt
1
Lever arm
2
Drill holding fixture
3
Guide slot (4 x)
4
Drill hole (4 x)
5
Base plate
6
Pillar
7
Block
8
Slider
9
Locking screw
10
Drill depth gauge with indicator
11
Screw
12
Vice:
Vice
13
Long slot
14
Locking device
15
Quick-release button
16
Clamping jaw
17
8
GB/IE
˜ Contents
1 Drill stand
1 Hexagon key
1 Vice
1 Operating instructions
˜ Technical data
Drill holding fixture for
clamping collar diameter: 43 mm
Drilling depth:
Dimensions:
Clamping jaw width:
Clamp width:
Safety advice
YOU SHOULD STORE ALL SAFETY
INFORMATION AND INSTRUCTIONS IN A
SAFE PLACE IN CASE YOU NEED TO REFER
TO THEM AGAIN IN THE FUTURE!
m
CAUTION! RISK OF INJURY! When
working with hand-operated electrical tool,
slipping or loosening of the mounted work-
piece can cause severe injuries. Therefore,
never work on a mounted work-piece using a
hand-operated electrical tool.
m
CAUTION! RISK OF SHEARING OR
CRUSHING INJURY! There is the risk of
shearing or crushing injuries while working
with the drill stand.
m
CAUTION! RISK OF INJURY! Pay
attention to flying chippings and splinters.
There is the risk of injury.
Keep out of the reach of children. Store the
 
 
product out of the reach of children.
Check the product for damage before each
 
 
use. Please do not use this device if you find
that it is damaged in any way.
Check that the screws are tight before each
 
 
use.
to 60 mm steplessly
adjustable
155 x 505 x
225 mm
(W x H x D)
65 mm
65 mm

Publicité

loading