Bumper Bar - Renolux IRIS Manuel

INSTALLING the CANOPY
On each side, attach the two black
plastic clips to the frame, over the
little stop (1).
(1)
RECLINE
To switch from a sitting position
to a reclining position, press the
black adjustment lever (Image 1)
on the back side, then slide the
seat into the desired position
(image 2).
To switch from a reclining position
to a sitting position, push the
back of the chair up.
(1) (2)
LEG REST
To lower the leg rest, press both
recline buttons at the same time,
then move it into the desired
position.
To raise the leg rest, simply lift it
up to the desired position.

BUMPER BAR

Fit the bumper bar by inserting it
in the 2 plastic supports until you
hear the "click" indicating that it
has been correctly locked on.
To remove the bumper bar, press
the button on the side of each
plastic support and pull.
10