Night Light Operation; Hold Option Or Vacation Mode - Marley Smart Serie Manuel D'utilisation

NIGHT LIGHT OPERATION

1. Touch and hold MODE
seconds. Notice that the "Light bulb" symbol will illuminate. Touch both
icons again and the "Light Bulb" will not illuminate.
2. Once decided, the display will lock in place after 20 seconds.
Note: Without the NIGHT LIGHT Icon illuminated, the display will darken
except the ON/OFF
Tip: Touch any of the remote controller icons (except OFF) and all the lights
will illuminate on the display, but will turn OFF again in 20-60 seconds. Instead
of using the remote controller you can simply touch the MODE
get the same results.

HOLD OPTION OR VACATION MODE

1. Touch MODE
HOLD Icon appears in bright blue and flashing. Touch the Up
Down Icon to set temperature back or up to your "Hold" temperature.
2. Once decided, the display will lock in place after 30 seconds or Touch
MODE icon.
(Also this will allow display to fully illuminate display)
Icon and UP
and MODE
icon once to activate the display and keep touching until the
Icon simultaneously for 1.5
icons.
icon once and
Icon or the
13