Additional Warnings - TCE TCE50030 Manuel Du Propriétaire

3. Remove the cover and membrane.
4. Turn the jack on its side so that old oil will drain
from the oil fill hole.
Note: Dispose of hydraulic fluid in accordance
with local regulations.
5. Fill the oil case until oil level is near the 1.8L of
the oil tub
KEEP DIRT AND OTHER MATERIAL CLEAR
WHEN POURING.
cover cover
membrane membrane
6. Replace the membrane.
7. Perform the Air Purge Procedure.

ADDITIONAL WARNINGS:

• DO NOT USE MOTOR OIL IN THE JACK.
• ONLY USE ANTI-FOAMING JACK OIL.
• ALWAYS USE A GOOD GRADE HYDRAULIC
JACK OIL.
• DO NOT USE HYDRAULIC BRAKE FLUID,
ALCOHOL, GLYCERINE, DETERGENT, MOTOR
OIL OR DIRTY OIL.
• USE OF A NON-RECOMMENDED FLUID CAN
CAUSE DAMAGE TO A JACK.
• AVOID MIXING DIFFERENT TYPES OF FLUID
AND NEVER USE BRAKE FLUID, TURBINE
OIL, TRANSMISSION FLUID, MOTOR OIL OR
GLYCERIN. IMPROPER FLUID CAN CAUSE
PREMATURE FAILURE OF THE JACK AND THE
POTENTIAL FOR SUDDEN AND IMMEDIATE
LOSS OF LOAD.
• DISPOSE OF HYDRAULIC FLUID IN
ACCORDANCE WITH LOCAL REGULATIONS.
13