LD Systems LDDSP44K Manuel D'utilisation page 11

2-way – channels CH A and CH B or CH C and CH D are configured as a 2-Way system. Channels CH A to CH D can be set up individually and signal
control for a 2-way system is achieved via the same signal source. Only channel CH1 or CH 3 is available for editing in the CHANNEL EDIT window.
Bridge – the power amplifiers of channels CH A and CH B or CH C and CH D are connected to create a more powerful amplifier. Input channel CH
1 and output channel CH A (or CH 3 and CH C) are available for editing. The signal is controlled via CH 1 or CH 3. Please note the pin assignment of
the speaker output jacks (printed on the power amplifier).
51
52
11