Fox F50-843 Manuel D'instructions page 12

2. Secure the motor/fan/cowling assembly to the centre of the rectangular base using the relative screws, nuts and
washers. Secure the cowling to the air ducts placing the gasket between the two parts (Fig. 3).
3. Fit the two drums to the duct outlets with the two relative gaskets (Fig. 4) and connect the support rods to the base.
(Fig. 5).
4. Screw the support rods and the bag hooks onto the
drums (Fig. 6).
10
Fig. 4
Fig. 3
Fig. 5
Fig. 6