EGO CH1800 Guide D'utilisation page 11

1. Connect the solar charging adaptor to the solar panel and the Nexus power
station and make certain that all connections are secure (Fig.2):
a) Solar charging adaptor power cord connecting the solar panel to the solar
charging adaptor;
b) Nexus Power Station power cord connecting the solar charging adaptor to the
Nexus power station;
2. Align the raised ribs of the battery pack with the mounting slot in the Nexus
power station and slide the battery pack down onto the power station. Make sure
that the battery pack is securely attached to the power station.
3. Position the solar panel in direct sunlight. Position the solar charging adaptor out
of direct sunlight. The solar charging adaptor will be powered by the panel and
communicate with the battery pack to evaluate the condition of the battery. When
the battery pack meets the charging conditions, the solar charging adaptor will
begin charging the battery and the green LED indicator will flash.
4. When the battery pack is fully charged, the green LED indicator will stop flashing
and shine solid green.
NOTE:
 Do not position the solar charging adaptor in direct sunlight. The solar charging
adaptor may warm during charging. Move the solar charging adaptor to a well-
ventilated area in the shade.
 If the solar panel is obstructed by obstacles, or the orientation of the solar panel
or the sun changes, the solar charging adaptor may not receive sufficient voltage
and the charging will stop. If the solar charging adaptor input is restored by
removing obstacles or adjusting the solar panel to directly face into the sunlight,
charging will restart in 5 minutes.
56-VOLT NEXUS POWER STATION SOLAR CHARGING ADAPTOR - CH1800/CH1800-FC
11