Maintenance + Storage; Service & Support - SNOWJOE SJBLZD-ECM Manuel D'instructions

EN
Assembly
Your snow broom requires assembly. Account for all parts and
hardware before beginning assembly. If any parts are missing
or damaged, or if you have any questions or need additional
instructions, please call the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563).
1. Twist to secure primary pole to head (Fig. 1).
Fig. 1
2. Secure middle pole to primary pole by depressing the
push button. Slide the pole until the push button locks in
place (Fig. 2).
Fig. 2
Middle pole
3. Repeat the same steps with the middle pole and scraper
pole (Fig. 3)
Fig. 3
Scraper
pole
+ Sun Joe customer
® ®
Head
Primary
pole
Primary
pole
Middle
pole
4. If a shorter snow broom length is desired, do not
assemble the middle pole. Attach the scraper pole directly
to the primary pole (Fig. 4).
Fig. 4
Middle
pole
Primary
pole

Maintenance + Storage

Detach the snow broom poles by using the push buttons.
Then use the bracket holder located on the snow broom head
for compact pole storage (Fig. 5).
Fig. 5
Service + Support
If your Sun Joe SJBLZD-ECM snow broom requires service
®
or maintenance, please call Snow Joe
service at 1-866-SNOWJOE (1-866-766-9563) for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an
authorized dealer, you will need to provide the model and serial
numbers, which can be found on the decal located on the
pole. Copy these numbers into the space provided below.
Record the following numbers from the pole of your new product:
Model #:
S J B L Z D - E
Serial #:
3
Scraper
pole
+ Sun Joe customer
® ®
C M