Grandstream GXV 3501 Guide De Démarrage Rapide page 4

Option A
Step 1:
Insert the power adapter into the 12V DC port on
the GXV 3501. Plug the other end of the adapter
into an AC power outlet.
Step 2:
Plug an RJ45 Ethernet cable into the network
port. Plug the other into a hub, switch or router.
Step 3:
Connect the video-out BNC cable of an analog
camera to the video port on the GXV 3501.
Option B
Step 1:
Plug an RJ45 Ethernet cable into the network
port. Plug the other end into a Power over
Ethernet (PoE) switch.
Step 2:
Connect the video-out BNC cable of your
camera to the video input port of the GXV 3501.
If the GXV 3501 is properly connected, the POWER,
READY and NETWORK indicator lights will flash green.
3