Filling With Water - Clatronic LB 3488 Mode D'emploi

• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
Instructions
This air humidifier with low energy consumption has been
developed for rooms of up to 30 m².
You can use the appliance to supply dry room air with pleasant
air moisture. This will offer the following benefits:
• It ensures a healthy room climate and thus your well-being.
• It prevents the raising of dust and is therefore ideally suited
for allergy sufferers.
• Your skin is supplied with moisture.
• It protects your furniture from drying out and prevents a
forming of gaps in parquet or wood floors.
• Electrostatic charge in the air is suppressed.
The appliance is additionally equipped with a ceramic filter in
the filler cap. The ceramic balls in the filter reduce limescale
deposits:
Preparation
• Take out all the parts carefully out of the packing.
• Clean the device before using it for the first time as de-
scribed in "Cleaning".
Location
• A suitable location is a non-slip, even surface.
• Watch out for electrical devices close by. They must not get
wet.
• The appliance works more effectively if you have the
windows and doors closed during operation.
Water
CAUTION:
Do not use any water from the clothes' dryer and water with
additives (such as scented oils, perfumes, fabric softeners, or
other chemicals). These can damage the device.
24
NOTE:
If you use extremely hard water, then limescale may form
in the tank, on the bottom of the base appliance and on the
surface of the ultrasound probe. If this probe is calcified, then
the appliance is not able to work properly.
• We recommend that you use distilled or freshly boiled and
cooled water.
• The water may not exceed a temperature of 40°C.
• Replace the water every 3-4 days, even if it is not used up.
• If you do not use the appliance for longer periods of time,
remove the water from the tank and from the base appli-
ance. Allow the parts to dry.

Filling with water

CAUTION:
Do not pour any water into the opening of the nozzle (Mist
discharge outlet).
1. To fill with water, remove the lid, lift the tank from the base
appliance and turn it over. The filling opening is located
beneath the tank.
2. Twist off the filler cap in the direction OPEN. Fill the water
into the tank up to approx. 3 centimeters below the rim.
3. Close the filler cap again by twisting it in the CLOSE direc-
tion and put the tank back into the base appliance.
4. Close the tank with the lid. It must fit tightly.
Turning on/ off
• Rotate the switch in the ON direction to turn on the appli-
ance. The indicator light in the water tank will light up blue,
if there is sufficient water in the tank.
NOTE:
If the indicator light in the water tank is red, then there
is no water in the tank. The mist production is stopped
automatically.
• Rotate the switch in the OFF direction, to turn the appliance
off.