Create Mobile App Control Account; Directions For Use; Technical Information - BEHA PV Wi-Fi Serie Mode D'emploi

Use of the heater
Using the heater with mobile app control:
Do not switch on the heater before the app is installed on your smartphone/tablet. The reason is that the heater is set to link-up mode for 3
minutes at irst time use. The Wi-Fi symbol will pulsate onto the loor for 3 minutes searching for router connection. f
Creating app control account:
To control the heaters by using the mobile app a wireless network must be available on your premises. This enables online control of your
heaters.
The irst time you connect, your device must be connected to the same wireless network as the heater. f
N etwork 2,4 GHz has to be used
Download the app «BEHA SmartHeater» from App Store (iPhone) or Google Play (Android). QR code at page . 2
Open the app. Create an account with password or log in with your Facebook account. If you are logging in with facebook there may only
be one user.
Create your account by typing in your e-mail address. Tap on
key in to the field Verification code
Then create your personal password in the field New Password.
Password:
The password must include 8
If you are multiple users, you need
Display Name: Every single user enter his name.
Further information is available at: http://beha.no/Service/FDV-Bruks-og-monteringsanvisning/Elvarme

TECHNICAL INFORMATION

Factory setting is 22 °C .
The thermostat can be adjusted downwards to 5°C - Frost guard level.
When the thermostat is connected, a small, red dot is shown on the loor.
By power outage:
Without app:
The heater returns to chosen temperature.
Cold draft/Open window function:
When opening a window and the temperature drops more than 5°C within 40 sec the cold draft function is activated. The heater changes
between chosen temperature for 10 seconds, and 5 degrees for 30 seconds. The function is active for max. 15 minutes.
BEHA heaters PV Wi-Fi and LV Wi-Fi are IP24 tested and approved for installation in bathrooms and utility rooms.
This apparatus is in compliance with the following EU directive:
2014/30/EU (EMC) electromagnetic noise
2014/35/EU (LVD)
2011/65/EU (ROHS) use of dangerous substances
The product must be treated in compliance with EU directive 2012/19 /
EU. The apparatus must not be disposed of together with regular house
waste but be handled to an approved waste dump for separation and
recovery station. A defect product must be treated correctly, in order to
prevent health or environment risks.
Information about energy consumption:
The product complies with the EU regulations on the Ecodesign Directive
(2009/125/EC) for energy-related products (ErP).
(not 5GHz).
Thanks for verifying your ................ account!
Your code is: 275266
. Tap on Verify code .
or more
to log in with
BEHA ELEKTRO AS, 3940 PORSGRUNN
Tlf:. 35 51 62 50 Ordre: 35 51 62 70
e-post:
www.beha.no
f
Send verify code. A code will be sent to your e-mail address. This code you
characters .
the same e-mail address and
f
The symbol
accompanying the product, indicates that this product
may not be treated as household waste. Handing it over
to a authorized for the recycling of electrical and
electronic equipment. Pick must be in accordance. he
local waste regulations. For further information
treatment, recovery and recycling of this product, contact
your local council, waste disposal service or the shop
where you purchased it.
post@beha.no
5
password .
on the product or on the documents
GB
T