WAGNER FURNO 500 Manuel Du Propriétaire page 8

Carry Case (optional) (Fig. 7)
AngleLoc™ (Fig. 8)
A:
B:
8a
Note: Always set the heat gun upright after it is turned o , either for a short break
or for storage. Avoid laying the unit on the side after shutdown. The heat will
remain in the unit and cooling will take longer. Store the unit only after the
nozzle is cool. Unplug the unit before storing to prevent accidental startup.
IMPORTANT: Always protect glass when working near windows.
Do not touch nozzle or the scraper blade when working. These become
extremely hot and will cause severe burns. Wear gloves to protect hands from
hot scrapings.
8
GB
7
8b