Gima 25820 Manuel D'instructions page 6

Product description
GIMA Security System or needle destroyer (Cod. 25820) is conceived to quickly (2-3 seconds) and
easily melt needles with a diameter up to 1,2 mm. It is so powerful that it can reach a temperature of
1000°C and destroy any kind of virus and bacterium. It can also melt needles with larger diameters (up
to 1,6 mm), however this operation takes a longer time (the melting system is patented).
GIMA needle destroyer is extremely solid; it weighs more than 4 Kg and has been built with high-
quality materials, according to IEC 62-5 standard in force for electro-medical equipment, ensuring a
very long lifetime. It is equipped with a withdrawable drawer for the collection of wastes and a practical
handle for an easy transport.
Technical features
Dimensions
Weight
Power supply
Melting temperature
Fuses
Self-resetting thermal fuse
Field of application, improper use
GIMA needle destroyer is conceived to destroy hypodermic needles and it cannot be used for purposes
not in compliance with its features.
Accident prevention
Do not introduce your hand in the compartment inside which the melting waste collection
drawer slides, according to warning sign applied to the product.
The product shall be used by qualified personnel only.
Do not use the equipment in case it is damaged. Apply to your retailer.
Avoid precarious repairs. Repairs shall be carried out with original spare parts only, which
shall be installed according to the intended use.
Do not carry out maintenance or cleaning operations when the equipment is connected to
the mains.
Since the product is made of corrosion-proof materials suitable for the enviromental conditions foreseen
for its normal use, does not require special care, however it is necessary to store it in a closed place
making sure that is protected from dust and dirt to assure its hygenic conditions. Moreover, it is
recommended to store the product in a place which can be reached easily by the personnel in case of
necessity.
FEATURES
22x14x119 cm
4 Kg
220V ~ 50Hz. 400W
1000 °C
2x2,5 AT
It is located in the transformer and switch the power supply off
when a temperature of 100°C is reached inside the transformer.
PRESCRIPTIONS
6