ION PARTY BALL FOGGER Guide D'utilisation Rapide page 6

Features
Front Panel
1. Party Light: This built-in dome party light
projects red, green, blue, white, purple, and
orange colors into fog.
2. Fog Output: This output produces fog after
fog fluid has been entered into the fluid tank.
3. Carrying Handle: Use this handle to easily
transport Party Ball Fogger by hand.
Rear Panel
1. Cap: This cap covers the fluid tank. Twist the
cap clockwise
counterclockwise to loosen it. The tube that
passes through the cap's center feeds the
fluid in the tank to the heater.
2. Fluid Level Indicator: This transparent part
of the tank shows its current level of fluid. If
this approaches the Low reading, fill the tank
with the recommended water-based fog fluid.
3. Power Cord: Connect this attached power
cord to a power outlet.
4. Power Switch: Use this switch to power
Party Ball Fogger on or off. After powering it
on, wait 2–3 minutes for the heater to warm
up.
5. LED Switch: Use this switch to start or stop
projection of the party lights.
6. Fog Switch: Use this switch to start or stop
production of the fog.
6
to tighten it or