Sunset Trading OPTIONS -85PHR Instructions D'assemblage

1.Slide the metal receiver over
the metal post.Press both sides
of back firmly downward until
locked in place.
A
B
4. KD Wings (If applicable)
Insert the male KD Bracket into the slot of the female
Bracket pressing firmly downward until the frame is tight.
Male
Assembly Instructions for OPTIONS-85PHR
A
Female
C
B
D
Note:
Make sure all PLUGS are connected on the product before plugging power cord
into power outlet. If not damage can occur.
The USB ports (where applicable) are designed with working voltage of 5V, and
can NOT be used to supply power for laptop computers (neither PC or Mac).
Plugging a laptop computer to the USB port may end up damaging either the
computer or the USB port due to unmatched working voltage. computer or the USB port due to unmatched working voltage.
2. Locate the power cord C
attached to the bottom back and
connect to plug D located at the
rear of seat.
C
D
3. The Transformer is attached to the
P
bottom of rail.
P